.空压机的维护与维修策略探讨
Discussion on maintenance and repair strategy of air compressor
空压机设备问题往往集中在油路循环系统、气路循环系统、水循环系统、其他系统这几个方面。所以，本节对这几个系统进行简要的分析，并提出了相应的维护措施。
Air compressor equipment problems often focus on oil circuit circulation system, gas circuit circulation system, water circulation system and other systems. Therefore, this section briefly analyzes these systems and puts forward corresponding maintenance measures.
（1）对油路循环系统的维护
(1) Maintenance of oil circuit circulation system
空压机投入使用之前，需要对各个系统进行检测，这样才能确保空压机的正常运行。空压机油路循环系统为空压机各个元件提供运转所需的润滑油。所以，空压机油路系统的正常运转能够在很大程度上降低器件之间的磨损，从而提高空压机的使用寿命。在空压机维护维修过程中，首先是对油路循环系统的日常检测与维护工作，这一工作的目的是确保空压机中各种零部件具有良好的润滑性，避免运行过程中出现过量的磨损与损耗。维护人员应检测空压机盖土网 防寒布 麻绳 油麻绳 麻刀 沥青麻绳 静压造型线 自动浇注机 铸铁拍门 钢制拍门 玻璃钢拍门内部各种零部件的润滑程度，如果润滑不足，应及时添加润滑油，保证空压机中温度与油压的平衡，避免出现由于润滑不足而导致的零部件过量磨损的问题[3]。
Before the air compressor is put into use, each system needs to be tested to ensure the normal operation of the air compressor. The oil circuit circulation system of the air compressor provides lubricating oil for each element of the air compressor. Therefore, the normal operation of the oil circuit system of the air compressor can greatly reduce the wear between devices, so as to improve the service life of the air compressor. In the process of air compressor maintenance, the first is the daily inspection and maintenance of the oil circuit circulation system. The purpose of this work is to ensure that all parts of the air compressor have good lubricity and avoid excessive wear and loss during operation. Maintenance personnel shall check the lubrication degree of various parts inside the air compressor. If the lubrication is insufficient, lubricating oil shall be added in time to ensure the balance between temperature and oil pressure in the air compressor and avoid excessive wear of parts due to insufficient lubrication [3].